PC 43

Application:                         PC 43 is an excellent cleaning compound to use in high pressure cleaning machines, soak or immersion tanks, as well as in ultrasonic cleaning tanks.  PC 43 is safe on most metals, including aluminium.

PC 43 is a highly concentrated solution of alkaline materials, penetrants, water softeners and wetting agents.  When PC 43 is not rinsed off, a light rust protective film will remain on the parts. This film will serve as a temporary in process rust preventative.  This film is effective in inhibiting corrosion for a period of several days. 


Polyethylene containers of 34 kg.


All information concerning the safety measures regarding our products can be found on the material safety data sheets provided by us.  During manipulation of the product always wear suitable protective clothing, gloves and an eye/face protection. 

Dispensing:   High Pressure cleaning:  Adjust concentration at nozzle to get 0,25 up to 1% solution.                                     Foam & Clean: Make a ± 20% solution in Foam & Clean dispenser. Apply foam to surface being cleaned.  Let dwell for 10-15 minutes or until foam runs off.  Pressure rinse before surface dries.  Immersion or soak Cleaning:  Use as 2 – 10% solution. Process time varies depending on type of machine, soil load and water conditions.  Ultrasonic: Use as 0,5 – 1% solution.
Controlling:   By titration or use a conductivity instrument, ask your technical adviser.
Technical information:         Form:        PC 43 is a liquid. 
  Specific gr.:

1,34 kg/l.

  pH value:  

pH 10.8 at 1% solution.

  Material tank: 

Steel ‑ stainless steel.


Readily biodegradable.  Polluted wastewater should be treated and be disposed of as hazardous waste.

Ask your technical adviser!

Use instructions: Dispensing: 0,5 – 10%, depends on application.
  Temperature:      ± 40/80°C.
  Cleaning time: Depends on soal load.
  New solution: Always add the product into warm- or cold water.